Stranded enameled litz round wire
Thermal Rating: 130℃, 200℃, 220℃.
Feature
Compliance with the requirement of NEMA 1000.
When the frequency increased, the AC resistance will rise due to skin effect and proximity effect. In this case, magnet-conducting enameled copper wire processes lower AC resistance than ordinary enameled wire.
Test at 200 kHz, the AC resistance of ring coil wound with magnet-conducting magnet wire could be lower 10~20%. If winding on inductance which uses in high frequency power supply, the AC resistance could be 6~10% lower at 115V/100kHz, the efficiency could increase for 0.59%.
Magnet-conducting enameled wire is easy to process as the ordinary enameled wire.
The available size is 0.25 to 3.2mm.
Application
High frequency inductors, transformers ... etc.
TAYA
Premium Selection
TPC_TAYA Electric Wire & Cable Co., Ltd (大亞電線電纜)
Inver-Fed Driven Motors Enamelled Copper Wire
Thermal Rating: 200℃
UL Recognized Class 200℃ Product TYDIFD-N200.
Feature
IFDW has superior insulation life in comparison to other enamelled wire insulation system when exposed to high temperature and harsh electrical environments.
IFDW improves insulation protection against transient spikes, high frequencies, elevated temperatures without increasing insulation thickness.
IFDW has the same ability as conventional enamelled wire to wind the wires into motors without damage.
Wide wire size from 0.3 mm to 3.2 mm.
Performance
IFDW meets or exceeds all of the requirements of NEMA 1000, MW 35-C specification.
The lifetime of IFDW is more than ten times to the wire specified in NEMA 1000, MW-35C in the high temperature pulse test.
Applications
Inverter-driven motors where high temperature operating conditions are expected.
Industrial motors used with IGBT.
High voltage motors.
High frequency motors.
TAYA
Premium Selection
Nickel Copper Manganese Wire Enameled Manganin wire
Thermal Rating: 200~220℃.
Feature
Compliance with NEMA 1000, possesses excellent process property. The heat-conductive enameled wire transmits the heat so the heat energy will not accumulate inside the wire.
By applying the heat-conductive enameled wire, the temperature of motor could be lowered, and the motor efficiency will be enhanced.
The heat conducting material in the enamel could enhance the heat conducting coefficient to 10 times. It is able to conduct the heat generated while current passes copper, and therefore reduce the damage to enamel.
Available size: 0.5~2.0mm.
Application
High frequency inductors, transformers ... etc.
SizeCopper wire radius(m)
Motor Input
(W)
Motor Efficiency
The surface
temperature of enameled wire
(℃)
* Calculated
Ordinary
Enameled
Wire
0.00550 80% 26.01
Heat-Conducting
Enameled wire
0.00550 80% 25.43
TAYA
Premium Selection
High Tension Enameled Wire
Insulation Description:
High tension strength is copper alloy specially designed for applications with high mechanical requirements. It's manufactured enameled wire with vanishes.
Features:
1. HTW: (a) Highe fatigue resistance.
(b) High tensions strength.
2. SHTW: (a) High tensions strength.
(b) Good bending.
3. Available Size : 0.03mm~0.10mm
Applications:
Voice Coil.
Cable.
Vibration motors.
Wireless charger.
Wireless sensor.
Coreless coil.
VCM coil.
Others.
TAYA
Premium Selection
TA YA ELECTRIC WIRE & CABLE CO., LTD.
Information
Tel: +886-6-5953131
Email: [email protected]
About
1955 - "Ta Ya Enterprise," the Company's former entity, was founded in Tainan City. 1967 - Changed name to Ta Ya Electric Wire & Cable Co., Ltd., and began production of magnet wires in addition to high-voltage rubber-insulated cables. 1986 - Relocated to the current address at Kuan Miao Dist. With a headquarter in Taiwan, Ta Ya has since begun constructing production facilities in China and Vietnam. In the last 60 years, the Company was fortunate to have a team of employees who worked diligently with mutual benefit, and who are constantly exploring and seeking diversification into new businesses.
TAYA
Premium Selection
TA YA ELECTRIC WIRE & CABLE CO., LTD.
Official Website
Amide-Imide Enameled Copper Wire
Thermal Rating: 220℃.
UL Recognition: TYFAI-R220
Insulation Description
AIW is a film insulation composed of Aromatic Polyamide-imide, provides excellent thermal stability, abrasion, chemical resistance and overloaded protection.
Features and Benefits
(a) Excellent resistance to chemical and solvent. Compatible with most solvent and impregnation compounds.
(b) Excellent film abrasion resisting winding damage.
(c) Excellent adhension resistance and thermal overloaded protection.
Typical Applications
Coils, Tool motors, Motors, Dry-type transformers, Hermetic and fractional and integral HP motors.
Applicable Specifications
Available BuildsAvailable Size Applicable Specifications
Metric(mm) AWG NEMAIEC JISCNS
2 Single 1.0~0.10 18~38 MW81-C 317-26 - -
1 Heavy 3.6~0.10 7~38 MW81-C 317-26- -
0 Triple 3.6~0.10 7~38 MW81-C 317-26 - -
TAYA
Premium Selection
MAGNET-CONDUCTING ENAMELLED WIRE
Thermal Rating: 130℃, 200℃, 220℃.
Feature
Compliance with the requirement of NEMA 1000.
When the frequency increased, the AC resistance will rise due to skin effect and proximity effect. In this case, magnet-conducting enameled copper wire processes lower AC resistance than ordinary enameled wire.
Test at 200 kHz, the AC resistance of ring coil wound with magnet-conducting magnet wire could be lower 10~20%. If winding on inductance which uses in high frequency power supply, the AC resistance could be 6~10% lower at 115V/100kHz, the efficiency could increase for 0.59%.
Magnet-conducting enameled wire is easy to process as the ordinary enameled wire.
The available size is 0.25 to 3.2mm.
Application
High frequency inductors, transformers ... etc.
TAYA
Premium Selection
THERMAL-DISSIPATION ENAMELED WIRE
Thermal Rating: 200~220℃.
Feature
Compliance with NEMA 1000, possesses excellent process property. The heat-conductive enameled wire transmits the heat so the heat energy will not accumulate inside the wire.
By applying the heat-conductive enameled wire, the temperature of motor could be lowered, and the motor efficiency will be enhanced.
The heat conducting material in the enamel could enhance the heat conducting coefficient to 10 times. It is able to conduct the heat generated while current passes copper, and therefore reduce the damage to enamel.
Available size: 0.5~2.0mm.
Application
High frequency inductors, transformers ... etc.
SizeCopper wire radius(m)
Motor Input
(W)
Motor Efficiency
The surface
temperature of enameled wire
(℃)
* Calculated
Ordinary
Enameled
Wire
0.00550 80% 26.01
Heat-Conducting
Enameled wire
0.00550 80% 25.43
TAYA
Premium Selection
Polyurethane Enamelled Copper Wire
Thermal Rating: 130℃ / 155℃ / 180℃
UL Recognized Class 130℃ Product TYPU-130 / TYA1-130.
UL Recognized Class 155℃ Product TYPU-F155 / TYAI-U155, and 180℃ Product TYFU-H180.
Insulation Description
UEW is a film insulation composed of Polyisocy-anate & Polyol. It's widely used in coils and motor windings.
Features and Benefits
With good solderability, reduces coil production costs due to elimination of mechanical or chemical stripping.
Superior \"Q\" characteristics at high frequencies.
Excellent film adhension and flexibility.
Extremely resistant to a variety of solvents including most varnishes and hardener catalysts.
Typical Applications
High frequency coils and transformers Relays, Solenoids coil, Small motors, Ignition coils.
Applicable Specifications:
Available BuildsAvailable Size Application Specifications
Metric(mm) AWG NEMA IECJIS CNS
2 Single 1.0~0.04 14~46 MW 75-C
MW 82-C 317-4
317-2C3202.6
---2185
TAYA
Premium Selection
Amide-Imide Overcoated Polyester-Imide Enameled Copper Wire
Thermal Rating: 200℃
UL Recognition: TYEEAI-N200
Insulation Description
EAIW is a dual film insulation composed of Polyester-Imide or Modified Polyester with a Polyamideimide (AI) overcoat. It is designed for continuous operation at 200℃, provides superior abrasion resistance, solvent resistance and moisture , refrigerants resistance.
Features and Benefits
(a) Excellent wet/dry dielectric characteristics and moisture resistance compared favorably with PEW+NY.
(b) Excellent flexibility, film adhesion and cut-through resistance.
Typical Applications
Motors, Dry transformers, Heavy duty hand tool motors, Encapsulated coils.
Available BuildsAvailable Size Applicable Specifications
Metric(mm) AWG NEMA IECJIS CNS
2 Single 1.0~0.1 18~38 MW35-C 317-13 - 11385
1 Heavy 3.6~0.1 7~38 MW35-C 317-13 - 11385
0 Triple 3.6~0.1 7~38 MW35-C 317-13 - 11385
TAYA
Premium Selection
Polyester Enameled Copper Wire
Thermal Rating: 155℃.
UL Recognized Class 155℃ Product THLT-E155S.
Insulation Description
PEW is a film insulation composed of Polyester, designed for continuous operation at 155℃, provides good thermal stability and excellent dielectric performance.
Features and Benefits
(a) Excellent crazing, abrasion, chemical resistance and provides good thermal stability.
(b) PEW has excellent physical properties for example, flexibility, abrasion resistance, adhension..., better than PVF.
Typical Applications
Motors, Micro Small motors, Transformers.
Available BuildsAvailable Size Applicable Specification
Metric(mm) AWG NEMAIEC JIS CNS
2 Single 1.0~0.04 18~46 MW 5-C 317-3 C3202.5 2183
1 Heavy 3.6~0.10 7~38 MW 5-C 317-3 C3202.5 2183
0 Triple 3.6~0.10 7~38 MW 5-C 317-3 C3202.5 2183
TAYA
Premium Selection