TPC_COMEUP Industries Inc. (川方企業)
Electric Winch
● 110V or 220V-240V x 1ph AC, 200 kg lift
● Positive retention of wire rope on to drum
● Electromagnetic spring-applied fail safe brake
● Heavy duty high efficiency ball bearing on all running surfaces
● Planetary gearing for maximum mechanical efficiency
● Enclosed drum flanges to prevent rope becoming trapped between drum and support steel plates
● Quiet running
● Emergency stop function switch is available upon request
● Low voltage control is available upon request
● Winch Weight : 32 kg
● Gross Weight : 34 kg
● Body dimension (L x D x H) : 510 × 210 × 241 mm
● Box dimension (L x D x H) : 610 × 286 × 285 mm
COMEUP
Premium Selection
Competition Winch - Blazer M3
Triple 8.0 hp 12V series wound motors for the ultimate in power and high speed line pull.
Three submersible sealed contactors w/silver-alloy contact pads for proven reliability in extreme conditions.
Rugged 3 stage spur gear train for maximum durability in competition use.
Dual braking system includes ratchet brake inside the gear box cover and air actuated brakes at each motor.
Air actuated clutch for driver controlled free spool allowing rapid rope pay-out.
Can be converted to the 2 motor M2 for various competition conditions.
Long drum version available to hold up to 60m (197ft) of rope.
Retrieval speed of up to 73 mpm (239.5 fpm).
Standard 33.6:1 gear ratio with optional 28:1 and 41.5:1 gear sets available.
COMEUP
Premium Selection
Intelligence Dashboard (IDB) Utility Duty Winch
.Compact and light weight allows a wide range of application on trailers and boats.
.High torque permanent magnet motor enables high line pull at lower amp and slip free dynamic brake.
.3-stage planetary gearbox delivers the most reliable and durable performance of winch under the most rugged conditions.
.Sliding pin and ring gear clutch for rapid rope payout.
.Automatic load-holding mechanical brake plus motor dynamic brake ensure holding the load without slippage.
.With circuit breakers to prevent motor overheating.
.Both built-in digital signal two ways wireless remote control and on board rocker switch (IN/OUT) control.
.Intelligence Dashboard (IDB) functions:
-Cutout switch prevents the vehicle battery from draining when not in use.
-On board rocker switch (IN/OUT) can be operated directly.
-With LED fan-shaped battery life indicator.
COMEUP
Premium Selection
Self-recovery winch
12V DC severe duty winch rated at 9,500 lb pulling meets or exceeds your expectations.
Heavy duty series wound motor equipped with thermal protection switch alters.
4 equally positioned pin holes with a stainless steel ergonomic T-handle make it possible to reposition in 90 degree increments.
Both built-in digital signal two ways wireless remote control and wired water-proof remote control
Cutout switch activates or deactivates the winch.
A 12 strand construction synthetic rope coated to improve abrasion and has no water absorption.
Tough aluminum die cast housings withstand strength of 2.0 x rated load of winch
The U.S. Germany, U.K. France, etc patented mechanical cone brake outside the drum expedites heat dispersion and also makes the winch ideal for use with synthetic rope.
Meet SAE J706, CE Machinery Directive 2006/42/EC and CE Electromagnetic Compatibility Directive 2004/108/EC.
Specifications / Part Number:
Part number: PN 295860
Rated line pull: 4,309 kg / 9,500 lb single line
COMEUP
Premium Selection
Competition Winch - Blazer M2
Twin 8.0 hp 12V series wound motors for the ultimate in power and high speed line pull.
Two submersible sealed contactors w/silver-alloy contact pads for proven reliability in extreme conditions.
Rugged 3 stage spur gear train for maximum durability in competition use.
Dual braking system includes ratchet brake inside the gear box cover and air actuated brakes at each motor.
Air actuated clutch for driver controlled free spool allowing rapid rope pay-out.
Upgradable to the triple motor M3 with a bolt-on kit.
Long drum version available to hold up to 60m (197ft) of rope.
Retrieval speed of up to 70 mpm (229.7 fpm).
Standard 33.6:1 gear ratio with optional 28:1 and 41.5:1 gear sets available.
COMEUP
Premium Selection
Self-recovery winch
12V DC severe duty winch rated at 9,500 lb pulling meets or exceeds your expectations.
Heavy duty series wound motor equipped with thermal switch alters when motor over-heating.
16 equally positioned pin holes with a stainless steel ergonomic T-handle make it possible to reposition in 22.5 degree increments.
Water-proof remote control with thermometric LED indicator w/5 m cord.
Cutout switch activates and deactivates the winch.
A 12 strand construction synthetic rope coated to improve abrasion and has no water absorption.
Tough aluminum die cast housings withstand strength of 2.0 x rated load of winch
The U.S. Germany, U.K. France, etc patented mechanical cone brake outside the drum expedites heat dispersion and also makes the winch ideal for use with synthetic rope.
Meet SAE J706, CE Machinery Directive 2006/42/EC and CE Electromagnetic Compatibility Directive 2004/108/EC.
COMEUP
Premium Selection
COMEUP INDUSTRIES INC.
Official Website
IDB Utility Winch
. Compact and light weight allows a wide range of application on trailers and boats.
. High torque permanent magnet motor enables high line pull at lower amp and slip free dynamic brake.
. Three type methods of control winch operation to Winch-IN /Winch-OUT-wireless remote control, handheld remote control and on board rocker switch control on the winch .
3-stage planetary gearbox delivers the most reliable and durable performance of winch under the most rugged conditions.
.Sliding pin and ring gear clutch for rapid rope payout.
. Automatic load-holding mechanical brake plus motor dynamic brake ensure holding the load without slippage.
. With circuit breakers to prevent motor overheating.
. Intelligence Dashboard (IDB) functions:
- Cutout switch prevents the vehicle battery from draining when not in use.
- On board rocker switch (IN/OUT) can be operated directly.
- With LED fan-shaped battery life indicator.
COMEUP
Premium Selection
Self-recovery winch
12V DC severe duty winch rated at 9,500 lb pulling meets or exceeds your expectations.
Heavy duty series wound motor delivers superior torque output and faster line speed. A motor equipped with a thermal protection switch
4 equally positioned pin holes with a stainless steel ergonomic T-handle make it possible to reposition in 90 degree increments.
Hardened steel, 3-stage planetary gear train for efficient and reliable operation.
Both built-in digital two ways wireless remote control and wired water-proof remote control.
A 12 strand construction synthetic rope coated to improve abrasion and has no water absorption.
Tough aluminum die cast housings withstand strength of 2.0 x rated load of winch.
U.S. Germany, U.K. France, etc patented mechanical cone brake holds the full load
Specification / Part Number
Part number: PN 295850
Rated line pull: 4,309 kg / 9,500 lb single line
COMEUP
Premium Selection
COMEUP INDUSTRIES INC.
Information
Tel: +886-2-24971788
Email: [email protected]
About
Started over four decades ago, COMEUP instituted the Flexible Manufacturing System in conjunction with Mori Seki Japan. This emphasized process controls at each step in the manufacturing process to assure high quality of each product component.
The COMEUP approach to process and quality thinking and execution is evident in the new, multi-floor factory. This vertical factory design increases control, efficiency and lines of communication compared to the typical single floor sprawl. The result is employee exposure to all product process stages and an engagement in quality output.
This is especially important with critical components, such as motors. Unlike other brands, COMEUP designs and manufactures their motors in their own manufacturing facility. This makes for perfect integration with the gear train and the COMEUP patented Cone Brake Structure. COMEUP makes 70% of their components in-house.
COMEUP
Premium Selection